Recovery of Ce and La from phosphogypsum leachate by adsorption using grape wastes.

The present research aimed to evaluate the use of grape stalk in the adsorption of lanthanum and cerium to identify the best operating conditions enabling the application of the bioadsorbent in REEs leached from phosphogypsum. The grape stalk was characterized and showed an amorphous structure with a heterogeneous and very porous surface. Also, it was possible to identify the groups corresponding to carboxylic acids, phenols, alcohols, aliphatic acids, and aromatic rings. The pH effect study showed that the adsorption process of La3+ and Ce3+ ions was favored at pH 5.0. The adsorption kinetics followed the pseudo-second-order model. In just 20 min, 80% saturation was reached, while equilibrium was reached after 120 min. The adsorption isotherms were appropriately adjusted to the Langmuir model, and the maximum adsorption capacities were obtained at 298 K, which were 35.22 mg g-1 for La3+ and 37.99 mg g-1 for Ce3+. Furthermore, the adsorption process was favorable, spontaneous, and exothermic. In the study's second phase, phosphogypsum was leached with a sulfuric acid solution. Then, the adsorption of REEs was carried out under the experimental conditions of pH after leaching and pH 5.0 (adjustment carried out with sodium hydroxide solution) at 298 K for 120 min and with adsorbent dosages of 1 and 5 g L-1. This process resulted in removal percentages above 95% for the most abundant REEs, such as neodymium, lanthanum, and cerium, at pH 5.0 and a dosage of 5 g L-1, demonstrating the effectiveness of the bioadsorbent used. These results indicate the potential of using grape residue as a promising bioadsorbent in recovering rare earth elements from phosphogypsum leachate.

Determination of Cl and S in crude oil by ICP-OES after sample digestion by microwave-induced combustion in disposable vessels.

A simple, fast and promising sample preparation method based on microwave-induced combustion in disposable vessels (MIC-DV) was developed for Cl and S determination in crude oil by inductively coupled plasma optical emission spectrometry (ICP-OES). The MIC-DV consists of a new approach of conventional microwave-induced combustion (MIC). For the combustion, crude oil was pipetted on a disk of filter paper and placed on a quartz holder, followed by the addition of igniter solution (40 µL of 10 mol L-1 NH4NO3). The quartz holder was inserted into a commercial 50 mL disposable polypropylene vessel containing the absorbing solution, which was then inserted in an aluminium rotor. The combustion occurs under atmospheric pressure in a domestic microwave oven not compromising the operator's safety. The following parameters of combustion were evaluated: type, concentration and volume of absorbing solution, sample mass and the possibility of performing consecutive combustion cycles. Using MIC-DV, up to 10 mg of crude oil were efficiently digested, using 2.5 mL of ultrapure H2O as absorbing solution. Moreover, up to 5 consecutive combustion cycles were possible without analyte losses, reaching a total sample mass of 50 mg. The MIC-DV method was validated according to Eurachem Guide recommendations. Results obtained for Cl and S by MIC-DV were in agreement with those obtained using conventional MIC, as well as those obtained for S in a certified reference material of crude oil (NIST 2721). Analyte spike recovery experiments were performed and recoveries at three concentration levels ranged from 99 to 101% for Cl and from 95 to 97% for S, indicating a good accuracy. The limit of quantification achieved by ICP-OES after MIC-DV were 73 and 50 µg g-1 for Cl and S respectively, applying 5 consecutive combustion cycles.

Interactions Between Calcium Hypochlorite and Irrigants Commonly Used in Endodontic Practice: A Chemical Analysis.

INTRODUCTION: This study aimed to identify possible products resulting from chemical interactions between calcium hypochlorite (Ca[OCl]2) and other irrigants for endodontic use using electrospray ionization quadrupole time-of-flight mass spectrometry. METHODS: The 5.25% Ca(OCl)2 was associated with either 70% ethanol solution, distilled water, saline solution (0.9% sodium chloride), 5% sodium thiosulfate, 10% citric acid, 17% ethylenediaminetetraacetic acid (EDTA), or 2% chlorhexidine (CHX). The reaction ratio was 1:1 and the products obtained were analyzed by electrospray ionization quadrupole time-of-flight mass spectrometry. RESULTS: The interactions between Ca(OCl)2 and CHX generated an orange-brown precipitate, without identification of para-chloroaniline and between Ca(OCl)2 and sodium thiosulfate, a milky-white precipitate. Furthermore, when the oxidizing agent was associated with EDTA and citric acid, chlorine gas was released. As for the other associations, 70% ethanol, distilled water, and saline solution, no precipitation or gas release occurred. CONCLUSIONS: The orange-brown precipitate occurs due to the chlorination of guanidine nitrogens, and the milky-white precipitate is due to the partial neutralization of the oxidizing agent. The release of chlorine gas occurs due to the low pH of the mixture, which results in the rapid formation and decomposition of chlorine. In this context, an intermediate rinsed with distilled water, saline solution, and ethanol between Ca(OCl)2 and CHX, citric acid, and EDTA seems to be appropriate to prevent the formation of by-products when these irrigants need to be used in the canal. Furthermore, if it is necessary to use sodium thiosulfate, a larger volume of the solution must be used compared to that used for the oxidizing solution.

A miniaturized liquid-liquid extraction method for further Na, K, Ca, and Mg determination in crude oil by FAAS.

In this study, a miniaturized liquid-liquid extraction (LLE) method for pre-concentration of Na, K, Ca, and Mg in crude oil was proposed. Analytes in crude oil were quantitatively extracted to the aqueous phase, followed by flame atomic absorption spectrometry (FAAS) determination. The following parameters were evaluated: type of extraction solution, sample mass, heating temperature and time, stirring time, centrifugation time, and the use of toluene and chemical demulsifier. Accuracy was evaluated by comparing the results obtained by the proposed method (LLE-FAAS) with those obtained after high-pressure microwave-assisted wet digestion and FAAS determination (reference values). No statistical difference was observed between the reference values and those using the optimized conditions for LLE-FAAS: 2.5 g of sample; 1000 µL of 2 mol L-1 HNO3, 50 mg L-1 of chemical demulsifier in 500 µL of toluene, 10 min of heating at 80 °C, 60 s of stirring, and 10 min of centrifugation. Relative standard deviations were lower than 6%. The limits of quantification (LOQ) were 1.2, 1.5, 5.0, and 0.50 µg g-1 for Na, K, Ca, and Mg, respectively. The proposed miniaturized LLE method presents several advantages, such as ease-of-use, high throughput (up 10 samples can be processed per 1 h), uses a high sample mass reaching low LOQs. In addition, the use of a diluted solution for extraction reduces the amount of reagents (around 40 times) and consequently laboratory residue generation, becoming an environmental friendly method. Suitable LOQs were achieved for analyte determination at low concentration even using a simple and low-cost sample preparation system (miniaturized LLE method) and a relatively low-cost determination technique (FAAS), avoiding the use of microwave ovens and more sensitivity techniques, which are required for routine analyses.

Glycoengineered anti-CD39 promotes anticancer responses by depleting suppressive cells and inhibiting angiogenesis in tumor models.

Immunosuppressive cells accumulating in the tumor microenvironment constitute a formidable barrier that interferes with current immunotherapeutic approaches. A unifying feature of these tumor-associated immune and vascular endothelial cells appears to be the elevated expression of ectonucleotidase CD39, which in tandem with ecto-5'-nucleotidase CD73, catalyzes the conversion of extracellular ATP into adenosine. We glycoengineered an afucosylated anti-CD39 IgG2c and tested this reagent in mouse melanoma and colorectal tumor models. We identified major biological effects of this approach on cancer growth, associated with depletion of immunosuppressive cells, mediated through enhanced Fcγ receptor-directed (FcγR-directed), antibody-dependent cellular cytotoxicity (ADCC). Furthermore, regulatory/exhausted T cells lost CD39 expression, as a consequence of antibody-mediated trogocytosis. Most strikingly, tumor-associated macrophages and endothelial cells with high CD39 expression were effectively depleted following antibody treatment, thereby blocking angiogenesis. Tumor site-specific cellular modulation and lack of angiogenesis synergized with chemotherapy and anti-PD-L1 immunotherapy in experimental tumor models. We conclude that depleting suppressive cells and targeting tumor vasculature, through administration of afucosylated anti-CD39 antibody and the activation of ADCC, comprises an improved, purinergic system-modulating strategy for cancer therapy.

Determination of Halogens by Ion Chromatography in Edible Mushrooms after Microwave-Induced Combustion for Sample Preparation.

In this study, the microwave-induced combustion (MIC) method was evaluated for the sample preparation of the most consumed mushroom species in Brazil (Champignon, Shiitake, and Shimeji) and further halogen determination by ion chromatography (IC). For this, sample mass, combustion aid mass, and absorbing solution (H2O and 50 mmol·L-1, 100 mmol·L-1, or 150 mmol·L-1 NH4OH) were evaluated. Bromine and iodine concentrations, determined by IC, were lower than the limits of detection (LODs, Br: 6 mg·kg-1 and I: 24 mg·kg-1). Inductively coupled plasma mass spectrometry (ICP-MS) was also used for Br and I determination, and the LODs were lower (Br: 0.066 mg·kg-1 and I: 0.014 mg·kg-1) than those obtained by IC. Concentrations of Cl, obtained by IC, ranged from 523 mg·kg-1 to 13053 mg·kg-1 with LOD of 40 mg·kg-1. In turn, Br and I concentrations, obtained by ICP-MS, ranged from 2.49 mg·kg-1 to 5.50 mg·kg-1 and from <0.014 mg·kg-1 to 0.047 mg·kg-1, respectively. Fluorine concentrations, determined by IC, were always lower than LOD (23 mg·kg-1). The trueness of the proposed methods was evaluated by recovery tests using standard solutions and a reference material (RM NIST 8435). When using the standard solution, recoveries ranged from 95% to 103% for halogen determination by IC and from 105% to 109% for Br and I determination by ICP-MS. When using the RM, recoveries of 102% for Cl by IC and of 87% and 86% for Br and I by ICP-MS, respectively, were obtained.

A three-dimensional microenvironment alters CD73 expression in cervical cancer.

Stem-like cells (CSCs) have a tumour-initiating capacity and play critical role in tumour metastasis, relapse and resistance to therapy. The ectoenzyme CD73, encoded by the NT5E gene, which catalyses the hydrolysis of AMP into adenosine, has been associated to an immunosuppressive tumour microenvironment, tumour cell adhesion and migration. Therefore, we investigated the expression and activity of CD73 in sphere-forming cells from cervical cancer in comparison to monolayer cells in vitro. In addition, in silico analysis was performed to determine the expression of CD73 and other members of purinergic signalling in CSC-like population derived from different tumour types in comparison to monolayer cells. CD73 protein expression levels and functionality in SiHa cells were analysed by flow cytometry and enzymatic assay, respectively. In silico investigation was performed through the analysis of seven datasets from different tumour types using GEO database. In vitro analysis showed a decreased CD73 protein expression and enzymatic activity in cervical spheres, when compared to monolayers. In addition, when sphere-derived cells are re-plated as monolayer culture, the CD73 expression and activity are restored. Supporting the in vitro results, in silico analysis showed that three-dimensional spheres derived from cervical, thyroid and breast cancer presented decreased expression of CD73, when compared to their adherent counterparts. The decreased expression of CD73 in sphere-derived cells or CSC-enriched population reinforce its important role in cell adhesion, tumour spreading ability and metastasis, suggesting CD73 as potential target to be further investigated in cervical cancer.

A single step ultrasound-assisted nitrocellulose synthesis from microcrystalline cellulose.

Nitrocellulose is a nitrated cellulose polymer with a broad application in industry. Depending on the nitrogen content, this polymer can be used for manufacturing explosives, varnishes, clothes, and films, being considered a product of high value-added. In this work, the use of ultrasound was investigated for the intensification of nitrocellulose synthesis from microcrystalline cellulose. The ultrasound-assisted nitrocellulose synthesis (UANS) was carried out using several ultrasound systems, such as baths and cup horns, allowing the evaluation of the frequency (from 20 to 130 kHz) and delivered power (from 23 to 134 W dm-3) to the reaction medium. The following parameters were evaluated: acid mixture (H2SO4, H3PO4, CH2O2 or CH3COOH with HNO3, 2 to 14.4 mol L-1), ultrasound amplitude (10 to 70%) and reaction time (5 to 50 min). Better nitrocellulose yield (nitrogen content of 12.5% was obtained from 1 g of microcrystalline cellulose employing a cup horn system operating at 20 kHz, 750 W of nominal power with 60% of amplitude, 25 mL of acid solution (13.6 mL of 18.4 mol L-1 H2SO4 + 9.2 mL of 14.4 mol L-1 HNO3 + 2.2 mL H2O), at 30 °C for 30 min. At silent conditions (mechanical stirring ranging from 100 to 500 rpm), the nitrogen content was lower than 11.8% which demonstrate the ultrasound effects for nitrocellulose synthesis.

Ultrasound-assisted conversion of tannic acid to gallic acid as a strategy to obtain value-added products.

In this work, ultrasound was applied for the conversion of tannic acid into gallic acid using only diluted H2O2 as reagent. Experiments were carried out using several types of ultrasonic horns operating at 20 kHz (VC750W processor). The following experimental conditions were evaluated: H2O2 concentration (0.2 to 8.5 mol L-1), horn type (10 to 25 mm of diameter), ultrasound amplitude (20 to 70%), sonication time (10 to 45 min), tannic acid concentration (170 to 1360 mg L-1), and reaction temperature (50 to 90 °C). Gallic acid production was monitored with ultra-performance liquid chromatography with high-resolution time-of-flight mass spectrometry (UPLC-ToF-MS). The isolated gallic acid was confirmed with nuclear magnetic resonance (1H and 13C NMR). It is important to emphasize that this study was developed as a proof of concept to demonstrate the potential of ultrasound for tannic acid conversion into gallic acid using just diluted H2O2. Under selected conditions gallic acid production yield was 128 ± 4 mg g-1 of initial tannic acid (using 170 mg L-1 of tannic acid as starting material). Reaction time was set as 30 min, which was carried out using 1 mol L-1 H2O2 and ultrasound amplitude of 50% at 90 °C. At silent conditions (mechanical stirring, from 100 to 1000 rpm), gallic acid production was halved (less than 78 ± 4 mg g-1 of initial tannic acid).

Structural and functional characterization of engineered bifunctional fusion proteins of CD39 and CD73 ectonucleotidases.

Extracellular diphosphate and triphosphate nucleotides are released from activated or injured cells to trigger vascular and immune P2 purinergic receptors, provoking inflammation and vascular thrombosis. These metabokines are scavenged by ectonucleoside triphosphate diphosphohydrolase-1 (E-NTPDase1 or CD39). Further degradation of the monophosphate nucleoside end products occurs by surface ecto-5'-nucleotidase (NMPase) or CD73. These ectoenzymatic processes work in tandem to promote adenosinergic responses, which are immunosuppressive and antithrombotic. These homeostatic ectoenzymatic mechanisms are lost in the setting of oxidative stress, which exacerbates inflammatory processes. We have engineered bifunctional enzymes made up from ectodomains (ECDs) of CD39 and CD73 within a single polypeptide. Human alkaline phosphatase-ectodomain (ALP-ECD) and human acid phosphatase-ectodomain (HAP-ECD) fusion proteins were also generated, characterized, and compared with these CD39-ECD, CD73-ECD, and bifunctional fusion proteins. Through the application of colorimetrical functional assays and high-performance liquid chromatography kinetic assays, we demonstrate that the bifunctional ectoenzymes express high levels of CD39-like NTPDase activity and CD73-like NMPase activity. Chimeric CD39-CD73-ECD proteins were superior in converting triphosphate and diphosphate nucleotides into nucleosides when compared with ALP-ECD and HAP-ECD. We also note a pH sensitivity difference between the bifunctional fusion proteins and parental fusions, as well as ectoenzymatic property distinctions. Intriguingly, these innovative reagents decreased platelet activation to exogenous agonists in vitro. We propose that these chimeric fusion proteins could serve as therapeutic agents in inflammatory diseases, acting to scavenge proinflammatory ATP and also generate anti-inflammatory adenosine.

Determination of microplastic content in seafood: An integrated approach combined with the determination of elemental contaminants.

A method for the determination of microplastic (MP) content in seafood is proposed based on the selective digestion of seafood without the degradation of MP. A simple approach was developed using diluted acid with microwave-assisted wet digestion. The following parameters were evaluated: nitric acid concentration (0.5 to 14.4 mol L-1), digestion temperature (180 to 220 °C), irradiation program holding time (10 to 30 min), MP particle size (0.3 to 5 mm), and the seafood mass (0.5 to 2 g). To develop a reliable method for the determination of MP amount, up to 2 g of an in natura seafood sample were spiked with a known amount of MP (100 mg of mixed MP). Suitable conditions were obtained using 1 mol L-1 HNO3 at 200 °C (10 min holding time). Digests were filtered and the plastic content was gravimetrically determined. The heating program was 20 min, which represents a significant reduction in the time normally reported in the literature for MP analysis (from few hours up to 3 days). The proposed method allowed gravimetric determination of eight plastic types (polyethylene terephthalate, polystyrene, expanded polystyrene, polypropylene, high and low density polyethylene, polycarbonate and polyvinyl chloride) with particle size ≥0.3 mm. Up to 2 g of an in natura seafood sample (shark species, acoupa weakfish, tuna fish, trahira, and pink shrimp) were efficiently digested, which opened the possibility of using the proposed digestion method for determining elemental contaminants (Al, As, Ca, Cd, Co, Cr, Cu, Fe, Hg, La, Mg, Mn, Mo, Ni, Pb, and Zn). Thus, as the main feature of the proposed digestion method is the possibility of determining MP and elemental contaminants using the same digestion protocol, saves time and reagents and provides accurate and precise information about different classes of marine pollutants (MP and elemental contaminants).

UPLC-ESI/Q-TOF MS/MS Method for Determination of Vildagliptin and its Organic Impurities.

Vildagliptin (VLG) corresponds to a drug used for the treatment of diabetes mellitus. This disease requires continuous treatment, and so the control of impurities present in it is important to assure the quality of this drug. Thus, it is necessary to use sensitive and selective detection techniques and the ultra-performance liquid chromatography is a better option compared with high-performance liquid chromatography because it enhances the separation efficiency with a shorter analysis time and an increased resolution. This research analysis was accomplished by using liquid chromatography/tandem mass spectrometry, and the quantification was performed by using an extracted ion from the VLG drug and its main organic impurities of synthesis. During the validation process, following international standards, the method proved to be linear for the tree substances (R2 = 0.997-0.998) and the analysis of variance showed a non-significant linearity deviation (P > 0.05). Three critical factors were selected to evaluate method robustness with a full factorial experimental design, and the changes in the parameters were found to be not significant for the quantification of VLG and its impurities. The ultra-performance liquid chromatography-tandem mass spectrometry for the determination of impurities in VLG was precise, accurate and robust proving to be effective for analysis in the pharmaceutical industry and to improve the quality, safety and effectiveness of the new drug developed.

P2X7 receptor activation increases expression of caveolin-1 and formation of macrophage lipid rafts, thereby boosting CD39 activity.

Macrophages are tissue-resident immune cells that are crucial for the initiation and maintenance of immune responses. Purinergic signaling modulates macrophage activity and impacts cellular plasticity. The ATP-activated purinergic receptor P2X7 (also known as P2RX7) has pro-inflammatory properties, which contribute to macrophage activation. P2X7 receptor signaling is, in turn, modulated by ectonucleotidases, such as CD39 (also known as ENTPD1), expressed in caveolae and lipid rafts. Here, we examined P2X7 receptor activity and determined impacts on ectonucleotidase localization and function in macrophages primed with lipopolysaccharide (LPS). First, we verified that ATP boosts CD39 activity and caveolin-1 protein expression in LPS-primed macrophages. Drugs that disrupt cholesterol-enriched domains - such as nystatin and methyl-ß-cyclodextrin - decreased CD39 enzymatic activity in all circumstances. We noted that CD39 colocalized with lipid raft markers (flotillin-2 and caveolin-1) in macrophages that had been primed with LPS followed by treatment with ATP. P2X7 receptor inhibition blocked these ATP-mediated increases in caveolin-1 expression and inhibited the colocalization with CD39. Further, we found that STAT3 activation is significantly attenuated caveolin-1-deficient macrophages treated with LPS or LPS+BzATP. Taken together, our data suggest that P2X7 receptor triggers the initiation of lipid raft-dependent mechanisms that upregulates CD39 activity and could contribute to limit macrophage responses restoring homeostasis.

Ultrasound-assisted extraction of chromium from residual tanned leather: An innovative strategy for the reuse of waste in tanning industry.

The tannery industry generates huge amount of waste with high Cr concentration, being classified as a dangerous waste. The development of alternative treatments for these residues aiming environmental friendly protocols are important topics of research. In this work, the use of ultrasound (US) energy for Cr removal from residual tanned leather was investigated. Ultrasound-assisted extraction (UAE) experiments were carried out in several systems as ultrasonic baths, cup horns, and probes, allowing to evaluate several frequencies (20-130 kHz) and power delivered to the extraction system. The following experimental conditions were evaluated: extraction solution (HCl, HNO3, H2SO4, CH2O2 and C2H2O4), temperature (10-90 °C), time (1-40 min), US amplitude (10-90%), feedstock amount (50-450 mg), and concentration of extraction solution (0.1-4 mol L-1). A multivariate factorial design with 10 axial points and 3 central points was applied. After UAE optimization an efficiency of 92% was achieved for Cr removal using 150 mg of feedstock, 3 mol L-1 HNO3, at 30 °C, 90% of amplitude, and 30 min. The same efficiency was not observed using mechanical stirring (100-500 rpm), which was lower than 65%. To prove the applicability of the proposed process some experiments for scaling up were performed using several reactor loads (1-9 L). Moreover, using the proposed UAE process Cr was efficiently removed at lower reaction time and at room temperature only by using US and diluted acid solution, representing energy and reagents saving.

An ultrasound-assisted sample preparation method of carbonatite rock for determination of rare earth elements by inductively coupled plasma mass spectrometry.

RATIONALE: A method for the determination of rare earth elements in carbonatite rocks by inductively coupled plasma mass spectrometry (ICP-MS) was developed. METHODS: An alkaline rock, carbonatite, was submitted to ultrasound-assisted extraction (USAE) using an ultrasound bath, a cup horn system or an ultrasound probe. The main USAE parameters were evaluated, such as extraction time (1 to 30 min), extraction temperature (20 to 100°C) and ultrasound amplitude (10 to 100%). For ICP-MS, a desolvation system (APEX-Q) was used to reduce interference in lanthanide determination. To evaluate if the effect of ultrasound improved extraction, experiments were carried out using magnetic stirring (500 rpm) for comparison. RESULTS: The temperature and ultrasound amplitude optimized for the method were 70°C and 40%, respectively, using dilute nitric acid (3% v/v). Quantitative analyte recoveries were obtained using an ultrasound bath (25 kHz/100 W) which allowed for the simultaneous extraction of twelve replicates. CONCLUSIONS: All the results obtained with the use of ultrasound systems were better than those obtained with mechanical stirring. The extracts were suitable for ICP-MS analysis and the results were in agreement with those obtained by the reference method (using wet acid digestion). Based on the results, the use of USAE can be considered an alternative method for sample preparation of carbonatite rocks, under milder conditions, for further ICP-MS analysis.

Challenges and trends for halogen determination by inductively coupled plasma mass spectrometry: A review.

RATIONALE: In this review, works published in the past 25 years for fluorine, chlorine, bromine, and iodine determination in several matrices by inductively coupled plasma mass spectrometry (ICP-MS) were covered. Usually, the determination of halogens has been performed by ICP-MS using a previous sample preparation step or, more recently, by direct analysis of solid or liquid samples. METHODS: Methods based on combustion, extraction, pyrohydrolysis, sample dilution in organic or aqueous medium, and wet digestion, among others, are discussed. Moreover, the recent applications of methods based on laser ablation (LA) and electrothermal vaporization (ETV) coupled to ICP-MS are discussed. RESULTS: The main challenge for methods using sample preparation has been to obtain a final solution compatible with ICP-MS, as well as to overcome problems related to analyte losses and contamination. Interferences due to the presence of dissolved organic compounds in solution, enhancement or suppression of ionization of analytes, and related matrix effects have been of concern when using ICP-MS. For the determination of halogens by ICP-MS using LA and ETV systems, some limitations related to the difficulty of calibration are pointed out, impairing the widespread use of this approach. CONCLUSIONS: A critical view is presented for further halogen determination by ICP-MS, mainly for matrices considered difficult to digest using conventional protocols.

HABITAT: An IoT Solution for Independent Elderly.

In this work, a flexible and extensive digital platform for Smart Homes is presented, exploiting the most advanced technologies of the Internet of Things, such as Radio Frequency Identification, wearable electronics, Wireless Sensor Networks, and Artificial Intelligence. Thus, the main novelty of the paper is the system-level description of the platform flexibility allowing the interoperability of different smart devices. This research was developed within the framework of the operative project HABITAT (Home Assistance Based on the Internet of Things for the Autonomy of Everybody), aiming at developing smart devices to support elderly people both in their own houses and in retirement homes, and embedding them in everyday life objects, thus reducing the expenses for healthcare due to the lower need for personal assistance, and providing a better life quality to the elderly users.

Determination of inorganic contaminants in carbon nanotubes by plasma-based techniques: Overcoming the limitations of sample preparation.

In this work, sample preparation of carbon nanotubes (CNTs) for further determination of inorganic contaminants was investigated using a microwave-assisted wet digestion single reaction chamber system (MAWD-SRC). Analytes (Al, As, Ca, Cd, Co, Cr, Fe, La, Mg, Mo, Ni, Pb and Zn) were determined in CNTs by inductively coupled plasma optical emission spectrometry (ICP-OES) and inductively coupled plasma mass spectrometry (ICP-MS, except for Al, Ca, Fe and Mg). Method parameters were evaluated, as the mass of CNT (25-300 mg), the temperature (220-270 °C) and the time (35-75 min) of irradiation program. The accuracy was evaluated by using a certified reference material (CRM) of CNT and also by comparison of the results with those obtained using neutron activation analysis (NAA) and high resolution continuum source graphite furnace atomic absorption spectrometry with direct solid sampling (DSS-HR-CS-GF AAS). Quantitative recoveries for all elements were obtained using 275 mg of CNTs, 6 mL of 14.4 mol L-1 HNO3 and 0.5 mL of 30% H2O2 with an irradiation program of 65 min (35 min at 270 °C). No statistical difference was observed between the results obtained after the decomposition of CNTs by MAWD-SRC with those obtained by NAA and DSS-HR-CS-GF AAS. No difference was also observed for the results using the proposed method and the values for the CRM of CNT. The use of MAWD-SRC showed good performance for CNTs digestion using relatively high sample mass (up to 275 mg), contributing to low limits of quantification (LOQs) and overcoming the current limitations of sample preparation. To the best knowledge of the authors, this work reports the highest sample mass feasible to be decomposed using wet digestion for CNTs among the methods proposed in literature.

Furfural production from lignocellulosic biomass by ultrasound-assisted acid hydrolysis.

Furanic platforms (e.g. furfural, furfuryl alcohol and hydroxymethylfurfural) can be obtained from biomass, being considered as a green alternative to petrochemical products such as fuels, and solvents. In this work, the use of ultrasound energy was investigated for the conversion of several lignocellulosic materials into furfural. The following parameters were evaluated: reaction time (30 to 120 min), ultrasound amplitude (20 to 70%) and feedstock amount (100 to 500 mg). The ultrasound-assisted acid hydrolysis (UAAH) process was applied to several lignocellulosic materials (sugar cane straw, rice husk, yerba-mate waste, grass and wood waste) aiming an investigation about the effects when working with real and complex feedstock. Better furfural yields (72.4 ±â€¯4.3 mg g-1) were obtained from 0.1 g of grass, employing an ultrasound cup horn system operating at 20 kHz, 20 mL of 4 mol L-1 HNO3, at 30 °C, 50% amplitude, and 60 min of sonication. Under the same reaction conditions, the results were compared with those obtained at silent condition (mechanical stirring, 100 to 500 rpm), which demonstrate the ultrasound effects for furfural synthesis. Therefore, the proposed UAAH process can be considered as a suitable alternative for biomass conversion to furfural, because it does not need previous step of lignin removal and might be performed in a single step.